If you ever find yourself in a situation where your AirPods case has run out of battery and you’re unsure about what to do, there’s no need to panic. In this guide, we’ll walk you through the steps to connect your AirPods even when the case is dead.

How to Connect AirPods When the Charging Case is Dead, it’s important to remember that as long as your AirPods themselves are charged and powered up, they can still function independently.

How To Connect AirPods When Case Is Dead

The good news is that connecting your AirPods without a functioning case is entirely possible, and it can be done directly through your device. If you’ve previously charged or connected your AirPods to your device, dealing with a dead case won’t pose any issues.

Access the settings on your device from the home screen.

Open the AirPods case with the AirPods inside and ensure the case is in close proximity to your device.

Tap on the connect tab.

Follow the on-screen instructions for setup. For AirPods Pro users, setting up Siri on your device might be required.

Once completed, a message saying “DONE” will appear, signaling the successful pairing of your AirPods.

It’s important to note that your AirPods can function even if the case is dead; they remain connected to the case, allowing you to use them. However, keep in mind that the AirPods themselves have their own batteries, and eventually, they will run out. When this happens, you’ll need to place them back in the case for both the AirPods and the case to recharge.

If the case has completely run out of battery and you attempt to connect to a new device, unfortunately, it won’t work. In such cases, once the case is recharged, you’ll need to know how to connect new AirPods to the case.

If you encounter difficulties in connecting your AirPods, you can troubleshoot the issue by exploring solutions for why your AirPods case is not connecting.

Why Do I Need A Case?

Without a case, charging your AirPods becomes impossible, as the case serves as both a holder and a charging station for your AirPods. Its primary function is to safeguard your AirPods and provide a convenient charging solution when needed. Taking proper care of your AirPods case is essential for its longevity.

Learn how to put on and turn off your AirPods case correctly by reading guides on these topics. Proper handling ensures that your case lasts longer and continues to function effectively.

It’s worth noting that resetting your AirPods to factory settings is also dependent on having the case. If you happen to misplace or lose the case, obtaining a replacement is necessary either through borrowing one or purchasing a new one, as the case is essential for charging your AirPods.

Enhance the aesthetics of your AirPods setup by coordinating your AirPods case with your phone case. This not only adds a stylish touch but also provides an extra layer of protection for your AirPods case, making it a fashionable and functional accessory.

How Do I Reconnect AirPods to The Charging Case?

Open the Settings on your phone and locate the Bluetooth icon.

Click on the information button next to “AirPods.”

Choose the option to forget the device, resetting the connection.

With both AirPods placed in the case, perform the following steps:

Open the lid and wait for the status lights to flash amber.

Press and hold the setup button located on the back of the case for a few seconds.

Once the status light turns white:

Move the open case close to your phone.

Your AirPods should now appear on the list of available Bluetooth devices.

If the status light doesn’t change color, consider rebooting the case:

Press and hold the setup button for approximately 10-15 seconds.

While holding the button, observe the status light flashing amber a few times until it eventually turns white.

By following these steps, you should successfully reconnect your AirPods, ensuring a smooth and reliable connection with your device.

Why Did My AirPods Case Die?

The cause of your AirPods case dying may be as simple as forgetting to charge it, or it could indicate an issue with the case battery. Over time, the lithium-ion batteries in the case can degrade, resulting in a decrease in battery life and a reduced power duration compared to when they were new.

For instance, if both the AirPods case and earpieces are fully charged at 100% and remain unused, the case could potentially last for up to five days before requiring a recharge. It’s important to be aware of the natural degradation of battery performance over time and to maintain regular charging habits to ensure optimal functionality. If you notice a significant decline in battery life, it might be an indication that the case battery is deteriorating, and you may need to consider a replacement or explore potential troubleshooting steps. If the AirPods case has completely run out of battery, a notable consequence is that the AirPods themselves will not turn off when placed back in the case. Instead, they will remain powered on even with the lid closed. This is because the case, which typically triggers the turning off of the AirPods when they are placed inside, is no longer functional due to a dead battery.

As a result, the earpieces will start discharging once the case’s battery level reaches 0%. If you encounter issues where your AirPods are not working, it’s advisable to check the status of the earpiece batteries. If the problem doesn’t seem to be related to the batteries, giving your AirPods a thorough cleaning might be a helpful troubleshooting step. Sometimes, debris or dirt in or around the charging ports or sensors can affect the functionality of the AirPods.

Lost An AirPod?

If you happen to lose one AirPod and need to connect two different AirPods to a single case, it’s fortunate that this is indeed possible. However, there are some specific requirements to keep in mind. The AirPods can be different, but they must belong to the same generation.

Place the distinct AirPods into the same rechargeable AirPods case.

Open the case and check if the status light flashes amber.

Press and hold the setup button for approximately 5 seconds; the light will then change to white.

Now, open the case and hold it close to your phone.

At this point:

A popup will appear on your device, prompting you to connect.

Once you complete the connection process, both sets of AirPods are now successfully connected to your device.

This method allows you to use two different AirPods with a single case, as long as they are from the same generation.

Can You Charge AirPods When the Case is Dead?

Charging AirPods without the case is not possible, as AirPods lack a charging port and do not support wireless charging on their own. If you find yourself in a situation where your case is dead but you need to charge the AirPods, the most practical solution is to either charge the case or borrow one from a friend.

It’s crucial to note that you will need a case that corresponds to the same AirPods model. Each AirPods model has its own specific case design, and they are not interchangeable.

However, if your AirPods are lost and offline, there is a way to find them even if the case is dead. Apple provides a “Find My” feature that allows you to locate your AirPods through the Find My app, even if they are not connected to your device. This feature relies on the last known location of the AirPods when they were connected to your device.

How to Use AirPods With Another Case

Yes, it is indeed possible to use your AirPods with a different case, provided that the AirPods and the case are of the same model. If you decide to switch cases, you’ll need to reset and reconnect your AirPods to your iOS device from scratch.

Launch Settings on your iPhone or iPad.

Open Bluetooth.

Find your AirPods from the list of connected devices and tap on the “i” button next to it.

Click on “Forget This Device” and confirm.

Now, follow these steps to connect your AirPods to a new charging case:

Place the AirPods in the new charging case and open the lid.

Press and hold the Setup button on the case for 10-15 seconds or until the LED flashes white.

Go to the Home screen on your iOS device and click the connection prompt to pair the AirPods with your device.

By following these steps, you can successfully use your AirPods with a different case, ensuring they are properly connected and functional.

Can I Use AirPods If the Case Stops Working?

Indeed, if your AirPods case stops working, you can still use your AirPods for a limited time, but there are some limitations to consider. The AirPods case serves two primary functions: charging the AirPods and facilitating the initial pairing with a device.

Without the case:

Limited Battery Life: Your AirPods will eventually run out of charge as they solely rely on the case for power. The case provides additional battery capacity, allowing you to recharge the AirPods on the go.

No New Device Connections: Without the case, you won’t be able to connect your AirPods to a new device. The initial pairing and connection capabilities are closely tied to the case.

Loss of LED Indicator Information: The case’s LED indicator provides useful information about the battery status and charging status of both the AirPods and the case itself.

Resetting Difficulties: The Setup button on the AirPods case is used for resetting them. If the case is not working, this functionality may be compromised.

If your AirPods case stops functioning, it’s advisable to seek a replacement from Apple. They often provide replacement services, and you may be eligible for a reduced price or warranty coverage, depending on the circumstances. This ensures that you can continue to enjoy the full functionality and convenience of your AirPods.

Conclusion

Knowing that you can connect your AirPods without a case is a significant advantage, as it prevents frustration when you need to use them unexpectedly. It’s crucial to be prepared and avoid being caught off guard in such situations.

To ensure the longevity of your AirPods, consider taking good care of them by using a protective case cover. Burga offers a variety of stylish covers for you to choose from, allowing you to personalize and safeguard your AirPods.

Using a case cover not only adds a touch of style but also serves as a practical way to identify your AirPods. This is especially useful in preventing mix-ups with someone else’s AirPods. In case of any mismatch, your device will alert you, providing an additional layer of security and helping you keep track of your valuable audio accessories.